Revist the Celerity Little Molly

We finished the Celerity Little Molly ahead of schedule making the end of June deadline easily!

However, the customer came in to get her dollhouse and decided she loved the wallpapered rooms so much that she wanted us to wallpaper the other rooms which were only primed and left for her to paint in the future when she had time.  So she picked out a few more wallpapers and I got to work installing those papers, cutting and installing some window trims and some doors, and staining/painting the stairs.

I actually finished this job 2 weeks ago, but a storewide sale and my own personal projects kept me distracted and unable to finish this blog entry!  I keep trying to figure out how I can cram 39 hours of work into the 24 hours God gives me in a day!  So far I haven't had any success with that; then again, I was never a genius at math so I keep trying to make it work.

The top right attic room got wallpapered to coordinate with the left side of the attic:

I tried making a template for the slanted wall that is papered with a white textured liner, but it ended up being easier to just stick the paper in there and cut and fuss with it around the wall divider instead of taking the time to create a template. 

Both hallways were wallpapered and stairs were stained.  Customer loved the wallpaper but we only had three sheets of it for the six walls so we opted to leave the back walls white (which helps them not clash with the other rooms they flow into - on the first floor the back wall goes into the kitchen and on the second floor the back wall is seen along with the bedroom).  But we still had to creatively cut the papers to get the three sheets to cover the four remaining walls:

As you can see in the pictures above, customer also had us paint and install the french door onto the porch (as well as the white door on the front which was seen in previous post pictures).

Lastly, customer really wanted a fireplace in the living room but instead of just gluing the fireplace on the wall like the customer requested, we added a sheet of bricking behind it (with customer's approval) to make it more realistic (otherwise the wallpaper would have been seen in the fireplace insert where the logs would go).

Now, during this time while finishing up these last details on the Little Molly, I have also been working on several personal projects (pot rack, library ceiling, and finishing up the lower cabinets for the Butler's Pantry in the mansion) but none are quite finished yet, but as soon as they are I will be updating you on them!

Celerity Little Molly

As much as I'd like to spend all my time working on my own projects, I still have customers' projects waiting for me at work.  There have been some quick little fixes (a Glenwood got some electrical installed, a roombox got reinforced with glue and supports, etc.); nothing exciting or worthy of photos.  Until I finished a customer's Celerity dollhouse yesterday!  It arrived in a mostly raw wood state (customer had assembled the structure and she had started to prime and install wiring before bringing it to us).

Exterior

Interior, first level had wiring installed and floor was primed.

There were minor issues with assembly: kneewalls in attic were installed backwards, roof was not flush in the back causing the front roof to not line up correctly, some interior walls were glued next to walls that they should have been glued flush in front of, etc. But this house is for a child and customer did not want to spend a small fortune having us remove everything to re-assemble/glue/nail it back in place correctly.  So we only fixed the top two issues that hindered finishing the house the way the customer wanted . . .

Kneewall was installed with angle facing the wrong way.

Front roof does not line up.

Kneewalls were pried out of the house, nails removed, cut the kneewalls down to fit (due to roof not being glued on properly), swapped sides and reinstall them.  But the front roof had to be removed, the front shaved off (which left a ridiculous 1/8" wide tail at the bottom overhanging which customer elected to have us cut it off), and then reinstalled.

KNEEWALL BEFORE

KNEEWALL AFTER

FRONT ROOF BEFORE

FRONT ROOF AFTER

The interior was to receive some wiring, wallpapers and paint.  One room was getting a chandelier (and the exterior was to get coach lights by the doors).  We primed, installed wiring, installed the wallpapers, and painted where customer desired.

Little Molly BEFORE

Little Molly AFTER

Attic Finished (with kneewalls installed correctly).

Bedroom with painted walls and accent wallpaper on back wall.

Living Room with chandelier.

The exterior had some broken and missing railing for the porches, and it was missing all windows and doors, and the customer wanted more of an "urban" look instead of a "Swiss Chalet" look (as it was pictured in the original instructions) so when picking out windows and color scheme, customer tried to keep it as streamlined and contemporary as possible.  We think the house turned out very cute and I know any little girl would love to play in it!

Little Molly Exterior BEFORE

Little Molly Exterior AFTER

Butler's Pantry (aka Bespaq Bashing)

I have had a vision in my head for the Butler's Pantry in my dream Mansion.  Lower cabinets of drawers for the silverware and napkins/linens and glass door upper cabinets for the dishes and glasses.  But no one had exactly what I wanted.  So it's time to Bespaq-bash!  (Go ahead, say "Bespaq-bash" 10 times fast!)  I bought 2 pieces of Bespaq (dresser drawer pieces) to create my lower cabinets:

These two dressers were about to be demolished.

 I found my lower cabinets!  They were just stacked one on top of the other and would need to be separated (without breaking anything!).  Never an easy task....

Gently separating the two sets of drawers from each other.

 Now, if you are familiar with Bespaq furniture, you know that sometimes (most times) you can sneeze in its general direction and pieces will break or fall apart.  But, of course, since I wanted these pieces to come apart, they were solidly glued and attached.  The Exacto knife could not slice and pry these pieces apart!

Giving up and bringing out the "big guns" (aka saw).

So I resorted to drastic measures and brought out the saw to get the work done!

Finally apart!

So the cabinets on the left will need some filler spacer wood at the bottom to get the counter tops all the same height on top but since Minwax Bombay Mahogany stain is a perfect match for Bespaq mahogany wood that is not a big deal to add a piece of wood down there and stain it to match.  I also have to sand some of the edges so the pieces butt right up to each other and look like one solid long piece but kids are asleep so I don't want to break out the noisy I-drill sander.  I can do that tomorrow or Monday (my "weekend" since I work Tuesdays - Saturdays).

Rough Draft layout.

Now I need to stain and cut a piece of wood to get all the lower cabinets the same height.  And then the corner space will need to be filled in and countertops put on.  Then I will need to find/play around with upper cabinets (represented in the photo by the white box I'm holding) to hold all the pretty dishes and glasses the Victorian family owns.  Rumor has it that Bespaq is coming out with new kitchen furniture this summer - single pieces, including upper cabinets!  Hopefully they will be available in mahogany stain and have glass front doors!  If not, I'm sure there's other Bespaq furniture I can bash up to create what I want!

Oh - and if you were wondering about the pretty pieces left over from the dressers:

Left over bits.

Not sure where I'll use the feet, but the other pieces will go over the Lady's doorway from her bedroom to her sitting room!  It'll match her furniture design perfectly!

Yesterday I had cut out the doorway from the Lady's sitting room to her bathroom and this evening I used the left over scrap piece from cutting that new doorway to fill in the original doorway opening out to the hallway.

Still waiting for glue to dry where scrap wood was used to fill in original doorway on left side of photo.  New doorway on back wall was cut yesterday.

Yes, those are popsicle sticks holding the scrap wood in place as the glue dries -- my tools are so high tech!  LOL

So, I'm taking baby steps, but work on my mansion is (slowly) happening!

Still Dreaming . . . But Getting Closer!

I did two major miniature events this year.  One was public (Chicago Show) and one was private (Mother's Day).

For the first time in my life, I got to attend the Chicago Show!  A friend and I went to both the 3 Blind Mice show and the Tom Bishop show (they happen the same weekend - gotta get our money's worth out of the plane ticket to get there so hit as many shows as we can! LOL).

Overview of one of the rooms at the Tom Bishop Chicago Show.

And although it was disheartening to see how many pretty things I can't afford, it did inspire me to make my mansion a priority.  I always put customers' projects ahead of mine (I bring home parts to paint once the kids are in bed or I bring the entire house home to work on instead of working on my own projects).  That's not gonna happen anymore.  From now on, I get to work on my stuff too!  My favorite miniatures I purchased for the mansion at the Chicago Show were:

Most Favorite!  Michael Reynold's marble top side table.

I'm not sure where this Michael Reynold's piece will go, but I fell in love with his stuff.  It really is drool worthy!  I cannot believe I had never heard of him before this -- although my wallet would be happier if I had never discovered him!

Servants' Bells, a la Downton Abbey style.  LOL

I also purchased a fantastic Zebra head mount to go in a "game room" (Game as in animals, not board games as my daughter thought).  I did not take a photo of it before I packed it up, but trust me, it's beautiful.  It prompted me to re-imagine the billiards room.  I love my pool table and I especially love my billiard light (Post on Billiard Light Fixture) but it always bugged me that the only objects in this billiard room was going to be a pool table and a light fixture.  But my friend talked it out with me and we decided that I could still use my billiard room light fixture, but convert the room into a Game Room/Smoking Room.  Then my cheetah chairs (which were out of place being stuck in a corner in the Master Bedroom) could go in this room along with my new Zebra head mount and it would still be a "manly" room!  Remove the pool table and insert bar!  I'm liking this idea!

So that was the public miniature event I attended.

For Mother's Day, my kids (and husband) gave me a great gift: kids ran off for about three or four hours and played with their miniatures in the basement (with no fighting involved!).  Husband took care of all food needs for the day (so no cooking or preparing food for me!).  So I had a chunk of time to play, er, I mean, work on my mansion!

First up, arch way had been cut and needed to be tested to ensure it was cut correctly.  Needed some sanding and some more minor cutting here and there, but ultimately it was perfect:

Looking thru music room parlor into foyer.

Looking crookedly from foyer into music room.

 While there I removed a wall for the stair area: the wall was supposed to provide a hallway for the stairs.  But I thought it just made the front foyer area look small.  So I removed the wall.

How it was - with divider wall and then raw wood stairs to the left of it.

Arrow shows where wall was.

So, I also don't like the raw wood stairs.  Even if I stain them they aren't achieving the level of elegance I want for this house.  But the only finished stairs that work in the space are the space-saving stairs by Majestic Mansion. Luckily (as with most Majestic Mansion products), I LOVE the stairs.  But there are two issues with putting the Majestic Mansions stairs in the foyer:

First issue - all the stairs stick out over the doorways.  On the upper levels I can cut the stair opening longer so the steps sit further back in the hallways thus clearing the doorways they currently overlap.  But on the first floor in the foyer, there is a wall that prevents me from cutting the opening larger.  So I will modify this doorway to have a narrow door - which will work just fine as this is the doorway to the Butler's Pantry so only servants would be going in there anyway.  I'm even considering hiding the doorway under the stairs instead -- but that may alter my plans on the inside of that room so I am pulling a Scarlett O'Hara (I'll think about what to do tomorrow, or next week or even next month).

Second issue: railing is on the wrong side of the stairs now!  And Majestic Mansions doesn't make this space saving stair with the railings on the right.  So . . . I spoke to Majestic Mansions about it and they do have a new staircase, but it's not quite as elegant as I'd like.  I have to now find a stain that matches (which I had to do anyway for the Ballroom Stairs) and move the spindles from the left to the right.

Also, since kids were behaving, I cut the doorway from the Lady's Sitting Room to her Bedroom.  But in cutting the doorway I discovered a nail that needs to be removed and there is a mis-struck nail along the back wall of the Lady's Bedroom too.  There are no ways to access the other end of these nails so I have to find or buy a metal cutting tool to remove them.

Doorway nail to be removed.

Mis-struck nail that will have to be removed somehow.

 Then I used the piece (I had just cut to create that new doorway) to fill in the opening from her Bedroom out to the hallway.

Left is the new doorway and the back wall has the old doorway that is now filled in.

 And as long as I was taking out the Spackle, I filled in the double door opening from the second story library too:

Double door opening is filled in with scrap wood.

View from other side of house of both excess doorways that are now filled (Lady's Bedroom and Library).

Last thing I got to do before I had to call it a day: Remove the wall to create the Family Room.

This wall needs to go.

 I don't like small hallways so this wall needs to be removed.  But then the room to the left can't be a private bedroom or something like that.  Which was fine because I wanted that room to become the "Family Room".  It will be connected via a spiral stair to the Nursery in the room above and once a day the nanny brings the children down to visit with the parents.  This is the room where that happens.  So wall must go!
I am putting my birthday Bespaq set in this room along with my new Michael Reynold's piece.

The double window opening on the left will be enlarged to be the entrance to the spiral stair addition.  The desk on the back wall is representative of a baby house that is packed up safe somewhere but it is about that size so it gave a good reference point.  Now the Michael Reynold's table matches the fabric well enough,

but it bugs me that it is the only gold piece in the room.  It seems out of place.  I keep moving it around but I need something to help bring this room together . . .

So work is progressing!  And now, thanks to my re-found desire to re-prioritize when work gets done on my projects, I suspect more work will happen quickly on my Mansion!

Holly Hobby in Progress

Working on a customer's Holly Hobby house that she started and then decided to hire us to help her finish it.  So far the biggest obstacle I've tackled on this house is the electrical.  Using Creative Reproductions 2 Scale's wiring system, I have laid the tapewire all throughout the house.  Knowing that the customer wants this house to last as an heirloom collection piece I wanted her to have no issues with the lighting.  CR2S products operate on DC (Direct Current) and with soldering the connection points there should be no risk ever of lighting problems (other than loose or blown out bulbs)!

So, after coming up with the electrical plan for where the wires needed to go, the next step in creating a problem-free wiring plan was to solder the tapewire at each intersection:

Several solder points on this wall.

Soldered junction.

 But soldering all the intersections results in tiny metal bumps that will prevent wallpapers from laying nicely.  Plus, if the wallpaper is thin enough or has a white background, the tapewire and solder spots will show thru the paper quite easily, if not rip the paper completely when I'm trying to smooth the paper flat over these metal solder spots.  So . . .
Step 2: cover all solder points with a layer of spackle.

Multiple solder spots covered.

All spackled.

Step 3 (and 4): Then I had to sand the spackle smooth and prime over the walls to create smooth, blemish-free, yet electrically solid, surfaces.

The two solder spots on the wall are covered, smooth, and blend right in.

You can barely tell where the electrical tape is, never mind where the solder spot is!

As you can see in the first photos posted above, the customer had previously painted the ceilings and walls.  Some walls were yellow, some tan, some a deep olive green.  But she was not happy with the paint colors and there were spots of color on the white ceiling where her paint brush had obviously accidentally strayed.  And the interior window trims were either a combo of color paint over hastily primed wood or not even primed fully before they had been installed.

Yellow paint got on her window trim.

This window trim was never painted before being installed.

The windows were not removable anymore -- whatever glue the customer used to install them is holding tight so we had to prime them installed in place.  We primed all the window trims and the walls so we are starting with a fresh palette:

While waiting for the customer to return to pick out wallpapers and/or paint colors, we have polyurethaned the wood floors (not shown) she had previously brought to us and we are installing the roof panels (third floor will not be decorated;  we are installing roof panels on both the front and back of the house, enclosing the third floor, and it will have a hinge so she can access the space but she will be using it for storage).

And those were the steps we took to wire and prepare this house for decorating!